old world craftsmanship
modern performance
Explore Our Passive Build Projects
Take a look at some of the projects we have completed and learn more about passive homes and the benefits of this building strategy and method. Read our common questions and answers below.
Explore our passive house project gallery and Frequently asked questions
Passive Homes Built for Lasting Comfort
Old Country Construction builds passive homes with careful detailing, durable materials, and practical performance in mind. We focus on comfort, efficiency, and craftsmanship that fits life in Westcliffe and the surrounding mountain communities.
Passive House is a rigorous standard for energy efficiency, focusing on airtightness, insulation, and ventilation to dramatically reduce energy use while maximizing comfort.
No, many Passive House strategies can be applied to remodels and additions to improve efficiency and comfort.
Homeowners enjoy lower energy bills, healthier indoor air, and lasting value from a more resilient structure.
We primarily serve Westcliffe, CO and surrounding rural counties, focusing on projects that benefit from local expertise.
The first three (3) pictures show the panels being delivered and staged in the Cul-de-sac below the home site. The last picture shows the concrete pad ready for our team to put the sill boards down in preparation for the panels to be set.
The concrete pad for this home has the sill boards set and some of the prefab B.Public panels are staged on the pad. The last picture shows the first panel being set in place.
Most of the wall panels are set, we could have installed the final three panels on the first day, however we left them out to give the crane access to the rear corner. We installed one roof panel on day two because we first needed to frame two center load-bearing walls and install supporting beams.
The first roof panel is in place and most of the needed beams are set, so we are ready to start setting roof panels. We
had staged the roof panels down the hill in the cul-de-sac, so we were bringing them up to the site on a trailer.
We have 4 roof panels left to set, it shouldn’t take long! The 3rd picture shows us setting the last roof panel at 11:37 A.M.
This was our first project using these B.Public panels and it went very well. We also achieved an amazing blower door test after the windows were set and the seams were all taped. 0.072 ACH at 50 pascals!























